What to Measure Before a Commercial Fit-Out in Toronto
Old drawings rarely match GTA industrial buildings. What to measure before a fit-out: clear heights, column grid, slab, overhead services and rentable area.
Toronto
3D Scanning for Toronto Condos: Garages, Facades & Reserve Fund Studies
TL;DR: The Executive Summary Financial Accuracy: Toronto condo boards and engineers are replacing manual tape measurements with survey-grade 3D laser scanning to prevent underfunded reserves. Prevent Special Assessments: Millimeter-accurate documentation...
MEP As-Builts for Plant Retrofits: What Plant Managers Actually Get
TL;DR: The Quick Takeaway If you manage an industrial plant or commercial facility in the Greater Toronto Area, your existing MEP (Mechanical, Electrical, and Plumbing) drawings may not reflect current site conditions. 3D laser scanning captures the exact as-built...
Why Toronto Architects Are Scanning Buildings Before Design (And Why You Should Too)
TL;DR: The Executive Summary for Architects Reclaim Billable Hours: Eliminate manual site surveys and tedious base-plan drafting, keeping your design team focused on profitable, high-value architecture. Mitigate Design Liability: Inaccurate legacy drawings lead to...
Renovating an Older Toronto Building: Existing Conditions, Heritage Rules and As-Builts
TL;DR: The Executive Summary 3D laser scanning captures the exact existing conditions of your Toronto building in 1-3 days, giving your architect accurate as-built drawings and 3D Revit models. This prevents costly construction surprises, satisfies Heritage...
Drone Facade Inspections & Building Envelope 3D Scanning
TL;DR: The Executive Summary Massive Cost Reductions: Drone inspections reduce facade survey budgets by 60% to 80% by eliminating the need for expensive swing-stage scaffolding. Speed & Safety: What traditionally takes 3 to 6 weeks of rigging can now be...
Scan to BIM for Toronto Green Standard (TGS) v4: Meeting Material Emissions Requirements
TL;DR: The Developer’s Compliance Guide The Mandate: Toronto Green Standard Version 4 is mandatory for all new Site Plan Applications. Tier 1 compliance is required; Tier 2+ unlocks Development Charge Refunds. The New Hurdle: You must now conduct a Material...
